Hanging Header Style

The styles of curtain headers not only shape the aesthetic of your space but also impact its functionality. Prior to starting, it's crucial to think about the purpose that your drapes are intended to fulfill in the room.

Pleated style

Tailor Pleat

  • Tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5-6.5 inches.
  • Panel width is the width that pleats already set. 180% fabric width is used for pleats.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • It works for the track, traverse rod, channel rod, and pole with rings.

Triple Tailor Pleat

  • Triple tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Panel width is the width that pleats already set.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • It works for the track, traverse rod, channel rod, and pole with rings.

Pinch Pleat

  • Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.

Triple Pleat

  • Triple pleats are more gathered than pinch pleats and have permanent sewn-in pleats for a more luxurious look.
  • Pleats space apart 5.5 inches.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.

Goblet

  • Goblet pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Panel width is the width that goblet pleats already are made. 180% fabric width is used for pleats.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • It works for the track, traverse rod, channel rod, and pole with rings.

Inverted Box Pleat

  • It is formed by two equal folds of fabric folded toward one another so they meet at the center of the pleat on the front of the fabric. It is what a box pleat looks like from behind.
  • Pleats space distance 5 inches.
  • Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
  • If rod length is 100 inches, order 2 panels each 50 inches width.
  • It works for rods with rings and track.

Pencil Pleat Tape

  • Pencil Pleat Tape with traditional pleats and parallel folds that are formed uniformly, in the same size, when the cords are pulled.
  • Pencil pleat tape for curtains in the home, various spaces and net curtains.

Grommet

  • Inside diameter 1.6 inches, outside diameter 2.25 inches.
  • 6 grommets for 42 in wide, 8 for 50 in, 10 for 72 in, 12 for 84 in, 14 for 100 in, 16 for 120 in, 22 for 150 in, 26 for 180 in.
  • Side hem 1 inch, bottom hem 3-1/4 inches.
  • 4 Grommet Colors : Antique bronze, Nickel, Black, Aluminum (outdoor curtain for rustproof)

Soft top

4- IN -1 Hanging Header

  • Versatile 4-in-1 construction: Hook Belt, Rod Pocket, Back Tab and Clip Ring. It works for rods with rings, rod with clip rings and pole.
  • Hook Belt: hang with metal pin hooks. (included)
  • Clip ring: hang with clip rings (not included)
  • Rod Pocket: hang with rod pocket for bunched-like look.
  • Back Tab: hang with back tab for pleated-like look.

Back Tab

  • Tab height 4 inches. Pocket size 3 inches.
  • 6 tabs per 40 in width, 8 tabs for 50 in width, 10 tabs for 72 in width, 12 tab for 84 in width, 15 tabs for 100 in width.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, order 200% fullness width for folds, then order 2 panels each 100 inches wide.
  • It works for rod or rod with clip rings.

Rod Pocket

  • Pocket 3 inches. Top flange is optional.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, consider 180% width for fullness, folds, order 2 panels each 75 inches wide.
  • It works for rod or rod with clip rings.

Flat Hook

  • Adjustable pin hooks 3 inches. 6 pin hooks per 40 inches width.
  • Side hem 1-inch,bottom hem 4 inches.
    Measure length from the eye ring to floor.
  • If rod length is 100 inches, consider 150-200% fullness to order more width for folds, order 2 panels each 75-100 inches wide.
  • It works for rod with rings.

Ripple Fold

  • Creates a modern, sleek look. 
  • Ripples always stay in shape when sliding
  • Only works with ripple fold tracks and carriers.
  • Popular in commercial projects and it has been seen more in residential projects these years.